NOS PRODUITS CBD

Power supply of 1m in 230V waterproof for x clone pro 10 and 30

1 power supply allows 20 lights to be fueled as a result

X Clone Pro is very versatile and perhaps used for seeds, propagation and as a complete long-term lighting.

X Clone Pro is a high -tech jewel, developed with the latest components created by world leaders, it meets the most demanding standards in terms of culture.

It is equipped with a latest generation resin which guarantees it optimal protection of LED fleas in wetlands and 97% light transmission.

With the latest Samsung LED chips, X Clone Pro 10 is the most efficient linear lighting on the market.

Thanks to its specially studied spectrum, it easily replaces an 18 W neon and shorten the space between the stages of plants while increasing the growth of roots, biomass and cells in the sheet.

X Clone Pro will be perfect for demanding professional cultivators, who want to optimize their energy consumption.

X Clone Pro is very versatile and perhaps used for seeds, propagation and as a complete long-term lighting.

X Clone Pro is a high -tech jewel, developed with the latest components created by world leaders, it meets the most demanding standards in terms of culture.

It is equipped with a latest generation resin which guarantees it optimal protection of LED fleas in wetlands and 97% light transmission.

With the latest Samsung LED chips, X Clone Pro 30 is the most effective linear lighting on the market.

Thanks to its specially studied spectrum, it easily replaces a 58 W neon and shorten the space between the stages of plants while increasing the growth of roots, biomass and cells in the leaf.

X Clone Pro will be perfect for demanding professional cultivators, who want to optimize their energy consumption.

200W LED light specially studied for growth.

X Veg 200 is a 200W LED light specially studied for growth, it will be suitable for all plants that do not flourish. Its high -tech LED chips from Japan offer a light power capable of replacing MH lamps from 300W to 400W.

Its robust and waterproof box in IP 65 is designed for use in wet conditions.

It allows you to replace the HPS or MH lamps from around 250 to 400 W and ensures a more uniform distribution of light for your culture, while emitting much less heat than HPS lighting.

Thanks to a heat sink placed above, X Veg 200 does not emit direct warmth to plants, this advantage allows it to be placed lower and to offer more light to your plants.

By going up or lowering the lamp, you will be allowed to play on the morphology of your plant in order to adapt it to your needs.

Horticultural LED luminaire (germination, growth, flowering)

Air Grow Pro Hyper Red is a high -tech jewel developed in Switzerland.

This over-vitamined red spectrum version to increase production and resin, positions it as the most effective lighting on the market with a light efficiency of 2.95 and an incomparable amount of red LEDs. Designed with the most reliable and efficient components on the market, it is equipped with the latest German LED flea technologies OSRAM offering a light efficiency of 3.4 Umol/D and 2 other LEDs of 3.43 UMOL/J developed, especially for F.O.G in collaboration With engineers in Japan and Korea.

Air Grow Pro Hyper Red is variable with an inventronic transformer 0-10V, this explosive cocktail has been developed for demanding and professional cultivators who are looking for the high end of technology and the latest advances in Swiss research.

All F.O.G lights are equipped with Horticultural LED chips with high rendering, it results in a gain in energy consumption of up to 40 to 60% compared to HPS lamps.

FOG High-Tech Fleur, X Flo 200 is a horticultural LED light designed for flower plants. It is suitable for germination and growth, but its strong point is the flowering phase.

X Flo 200 can be replaced by HPS or MH lamps with a power of up to 400 W. This makes it possible to obtain a more uniform distribution of light for your culture while giving off much less heat.

It is possible to place the lights at the desired distance without heat problems, allowing unprecedented lighting levels for your plants and better control of growth conditions. With the fleas, which generate high quality light, you can optimize your lighting and production.

X Flo 200 has two white spectra and a red spectrum, much more effective than a simple white spectrum and improve the quality of your production.

Horticultural LED luminaire (germination, growth, flowering)

Air Grow Pro Hyper Blue is a high -tech jewel developed in Switzerland.

The hyper Blue version has a higher proportion of blue irradiation that improves:

The medicinal value of cannabis in terms of cannabinoid and polyphenols content.
Inhibits the development of gray mold.
Help the opening of stomates.
Inhibits elongation.
Increases the expansion of the leaves.

Air Grow 200 is the latest high -tech jewel designed by F.O.G, developed with the latest components created by world leaders, it meets the most demanding standards in terms of culture.

Air Grow 200 is a horticultural LED light designed for plants that flourish, it will be perfect for the cultivation of flowers, strawberries, raspberries and cannabis. It is suitable for germination and growth but its strong point is flowering.

High-tech jewelry, the range of LED horticultural lights F.O.G Black Series has been developed by our research and development department in Switzerland, to offer high-performance and modular products with the best value for money.

Designed with reliable and efficient components, its structure makes it possible to perfectly start the light on the banks of the culture.

This range of High Tech lights is equipped with the latest Red Led Flea Technologies Osram Oslon SSL 660nm and Samsung 301h

To achieve this technological feat everything has been revised.

- New LED flea technologies and transformers.

- A diminished weight and volume to mitigate shipping costs.



3 spectra in 1

Its 3 in 1 spectrum allows you to use the lighting in any type of situation and offer significant advantages.

Spectrum 1 = increase in active ingredients, THC, CBD, terpenes, flavors.

Spectrum 2 = tight inter-noeuds and production of large leaves for more photosynthesis.

Spectrum 3 = resin yield and production.



Rooting of cuttings and germination.

Place the luminaire 50cm from the plants and adjust the light intensity on 25%.

Repotting

Light intensity at 25% for 3 days with a first watering at 1.1 - 1.2 EC

Growth

Increase the light intensity to 50% with watering to 1.3 - 1.6 EC

Intensive growth

Increase the light intensity to 75% with watering to 1.6 - 2.0 EC

Bloom

Place the lighting at 20 - 30cm from the plants and adjust the light intensity to 100% (EC 2.0 - 2.6).



Possible yield:

+0 to 2gr/W (0 to 800 gr on 1.2m x1.2m) (0 to 700 gr over 1m x1m)

Can increase by:

+0 to 79% THC, CBD, CBC, CNG, Delta 8.

Can increase the terpenes of:

+0 to 28.5%

High-tech jewelry, the range of LED horticultural lights F.O.G Black Series has been developed by our research and development department in Switzerland, to offer high-performance and modular products with the best value for money.

Designed with reliable and efficient components, its structure makes it possible to perfectly start the light on the banks of the culture.

This range of High Tech lights is equipped with the latest Red Led Flea Technologies Osram Oslon SSL 660nm and Samsung 301h

To achieve this technological feat everything has been revised.

- New LED flea technologies and transformers.

- A diminished weight and volume to mitigate shipping costs.



3 spectra in 1

Its 3 in 1 spectrum allows you to use the lighting in any type of situation and offer significant advantages.

Spectrum 1 = increase in active ingredients, THC, CBD, terpenes, flavors.

Spectrum 2 = tight inter-noeuds and production of large leaves for more photosynthesis.

Spectrum 3 = resin yield and production.



Rooting of cuttings and germination.

Place the luminaire 50cm from the plants and adjust the light intensity on 25%.

Repotting

Light intensity at 25% for 3 days with a first watering at 1.1 - 1.2 EC

Growth

Increase the light intensity to 50% with watering to 1.3 - 1.6 EC

Intensive growth

Increase the light intensity to 75% with watering to 1.6 - 2.0 EC

Bloom

Place the lighting at 20 - 30cm from the plants and adjust the light intensity to 100% (EC 2.0 - 2.6).



Possible yield:

+0 to 2gr/W (0 to 800 gr on 1.2m x1.2m) (0 to 700 gr over 1m x1m)

Can increase by:

+0 to 79% THC, CBD, CBC, CNG, Delta 8.

Can increase the terpenes of:

+0 to 28.5%

High-tech jewelry, the range of LED horticultural lights F.O.G Black Series has been developed by our research and development department in Switzerland, to offer high-performance and modular products with the best value for money.

Designed with reliable and efficient components, its structure makes it possible to perfectly start the light on the banks of the culture.

This range of High Tech lights is equipped with the latest Red Led Flea Technologies Osram Oslon SSL 660nm and Samsung 301h

To achieve this technological feat everything has been revised.

- New LED flea technologies and transformers.

- A diminished weight and volume to mitigate shipping costs.



3 spectra in 1

Its 3 in 1 spectrum allows you to use the lighting in any type of situation and offer significant advantages.

Spectrum 1 = increase in active ingredients, THC, CBD, terpenes, flavors.

Spectrum 2 = tight inter-noeuds and production of large leaves for more photosynthesis.

Spectrum 3 = resin yield and production.



Rooting of cuttings and germination.

Place the luminaire 50cm from the plants and adjust the light intensity on 25%.

Repotting

Light intensity at 25% for 3 days with a first watering at 1.1 - 1.2 EC

Growth

Increase the light intensity to 50% with watering to 1.3 - 1.6 EC

Intensive growth

Increase the light intensity to 75% with watering to 1.6 - 2.0 EC

Bloom

Place the lighting at 20 - 30cm from the plants and adjust the light intensity to 100% (EC 2.0 - 2.6).



Possible yield:

+0 to 2gr/W (0 to 800 gr on 1.2m x1.2m) (0 to 700 gr over 1m x1m)

Can increase by:

+0 to 79% THC, CBD, CBC, CNG, Delta 8.

Can increase the terpenes of:

+0 to 28.5%

Applications:

2 lights for a culture space of 1.2m x 1.2m and 1.5m x 1.5m

Compatible with Black Series 600W (use the black series UV clip)

Compatible with Air Grow Pro II & III (use the UV Air Grow Pro II & III UV clip)

Black Series without the suspension kit)







The UVA-UVB-IR LED Boost LED bar is the latest high-tech jewel developed by our research and development center in Switzerland.

This 3-in-1 LED bar is made up of UVA-UVB and infrared LED chips to boost your yield, rate of active ingredients and terpenes.



This spectrum directly influences the quality and the quantity of resin during flowering.

SEOUL VIOSYS LED UVB = 310 NM Last technologies
SEOUL VIOSYS LED UVA = 385 NM Last technologies



When the right amount of UV is present:

Increases oils, resin, and THC and CBD levels.
Accelerates the seed germination process.
Increases the cripple mass.
Promotes flowering

Causes more ramifications and less stretching.
Improves taste and smell.
Creates more robust plants.

Increases resistance to insects, bacteria and fungi.
Strengthens plants and prepares them better for high intensity light.

Reduces the shock time and accelerates the production and yield process.


When the amount of UV is present in high doses: it:

May decrease yield, slow down photosynthesis and cause plant damage.

Natural defense mechanism of a plant:
To protect themselves against the effects of ultraviolet rays, cannabis plants will develop a natural defense mechanism.
The formation of trichomes by alkaloids and flavonoids acts as photoprotective molecules go which protect your plants.
A denser layer of resin, with more THC will form to protect them from ultraviolet rays.

Lydon et al., 1987 - UVB Radiation Effects on Photosynthesis Growth and Cannabinoid Production of Two Cannabis Sativa Chemotypes



Plants cultivated inside without exposure to UVs can lack these advantages. This is why it is important to choose an interior culture lighting that includes UV in the right dose.
Despite our choice to use the latest UV LED chip technologies Seoul Viosys, the lifespan of a UV LED chip remains lower compared to red and white LED fleas. So we made the choice to add UV separately to our lights so as not to decrease the lifespan of the entire luminaire. So you will have the advantage of being able to replace future elements at lower costs and accept future limitless technologies.




This spectrum directly influences the morphology of the plant and its flowering.

Led prolight infra red = 730nm



When the right amount of infra red is present:

Triggers flowering more quickly on long -day plants.

Lie the plants.

Increase the terpenes.

Brings warmth to plants.

Activates the effect of Emerson.



When the quantity of red infra is too large:

Causes a harmful elongation for yield.

Risk of plant burn.

Brings too much warmth to culture.



Applications

Use growth (6 p.m./d) for:

The 100% at 50% indica genetics which have tight inters-noes with few elongations.

Use in the last 3 weeks of flowering (12h/d) for:

Genetics 50% to 100% Sativa with long inters-noeuds.



FEATURES

Power: 30W

Dimension: 110cm x 7cm x 7 cm

Weight: 1.5 kg

Transformer: integrated into the LED bar and not variable

2 years warranty

Take: Switzerland 230V AC

APPLICATIONS:

PLANT MORPHOLOGY MANAGEMENT:

BOOST UVA-UVB-IR is provided with infra-red LEDs, which applied in growth allow you to increase the inter-node space.

Use 18h/day from growth to:

Genetics that have tight internodes with little elongation.

Use 12h/day in the last 3-4 weeks of flowering to:

Sativa genetics with high elongation.



Use 2 x 30w 80cm BOOST UVA UVB IR fixtures for a 1m x 1m grow area



COMPATIBLE WITH:

BLACK SERIES 400: Bring the fixing clip (CLIP BLACK SERIES 400 and 600)

FOR THOSE WHO DO NOT OWN F.O.G FIXTURES:

Bring the kit of 2 suspensions (BOOST suspension kit)





The BOOST UVA-UVB-IR LED bar is the latest high-tech gem developed by our research and development center in Switzerland.

This 3-IN-1 LED bar is made up of UVA-UVB and INFRA-RED LED chips to boost your performance, active ingredient and terpene levels.



This spectrum directly influences the quality and quantity of resin during flowering.

SEOUL VIOSYS LED UVB = 310 nm latest technologies
SEOUL VIOSYS LED UVA = 385 nm latest technology



When the right amount of UV is present, it:

Increases oils, resin, and THC and CBD levels.
Accelerates the seed germination process.
Increases root mass.
Promotes flowering

Causes more branching and less stretching.
Improves taste and odor.
Creates stronger plants.

Increases resistance to insects, bacteria and fungi.
Strengthens plants and better prepares them for high intensity light.

Reduces shock time and speeds up the production process and yield.


When the amount of UV is present in high doses, it:

May decrease yield, slow photosynthesis and cause plant injury.

Natural defense mechanism of a plant:
To protect themselves against the effects of ultraviolet rays, cannabis plants will develop a natural defense mechanism.
The formation of trichomes by alkaloids and flavonoids acts as photoprotective molecules that will protect your plants.
A denser layer of resin, with more THC will form to protect them from ultraviolet rays.

Lydon et al., 1987 - UVB radiation effects on photosynthesis growth and cannabinoid production of two cannabis sativa chemotypes



Plants grown indoors without UV exposure may lack these benefits. That's why it's important to choose indoor grow lighting that includes UV at the right dose.
Despite our choice to use the latest SEOUL VIOSYS UV LED chip technologies, the lifetime of a UV LED chip remains lower compared to red and white LED chips. We have therefore chosen to add UV separately to our luminaires so as not to reduce the lifespan of the entire luminaire. Thus you will have the advantage of being able to replace future elements at lower cost and accept future technologies without limits.




This spectrum directly influences the morphology of the plant and its flowering.

LED PROLIGHT INFRA RED = 730nm



When the right amount of INFRA RED is present, it:

Triggers flowering faster on long-day plants.

Lengthen the plants.

Increases terpenes.

Brings warmth to plants.

Activates Emerson's effect.



When the amount of INFRA RED is too high, it:

Causes elongation which is detrimental to yield.

Risk of burning plants.

Brings too much heat to the culture.



APPLICATIONS

Use from growth (18h/d) for:

100% to 50% indica genetics that have tight internodes with little elongation.

Use in the last 3 weeks of flowering (12h/d) for:

50% to 100% sativa genetics with long internodes.



FEATURES

Power: 30w

Dimensions: 110cm x 7cm x 7cm

Weight:1.5kg

Transformer: integrated in the led bar and not dimmable

2 years warranty

Plug: Switzerland 230v AC

APPLICATIONS:

PLANT MORPHOLOGY MANAGEMENT:

BOOST UVA-UVB-IR is provided with infra-red LEDs, which applied in growth allow you to increase the inter-node space.

Use 18h/day from growth to:

Genetics that have tight internodes with little elongation.

Use 12h/day in the last 3-4 weeks of flowering to:

Sativa genetics with high elongation.



Use 1 BOOST UVA UVB IR light of 15w 60cm for a cultivation area of 80cm x 80cm



COMPATIBLE WITH:

BLACK SERIES 320: Bring the fixing clip (CLIP BLACK SERIES 320)

FOR THOSE WHO DO NOT OWN F.O.G FIXTURES:

Bring the kit of 2 suspensions (BOOST suspension kit)



The BOOST UVA-UVB-IR LED bar is the latest high-tech gem developed by our research and development center in Switzerland.

This 3-IN-1 LED bar is made up of UVA-UVB and INFRA-RED LED chips to boost your performance, active ingredient and terpene levels.



This spectrum directly influences the quality and quantity of resin during flowering.

SEOUL VIOSYS LED UVB = 310 nm latest technologies
SEOUL VIOSYS LED UVA = 385 nm latest technology



When the right amount of UV is present, it:

Increases oils, resin, and THC and CBD levels.
Accelerates the seed germination process.
Increases root mass.
Promotes flowering

Causes more branching and less stretching.
Improves taste and odor.
Creates stronger plants.

Increases resistance to insects, bacteria and fungi.
Strengthens plants and better prepares them for high intensity light.

Reduces shock time and speeds up the production process and yield.


When the amount of UV is present in high doses, it:

May decrease yield, slow photosynthesis and cause plant injury.

Natural defense mechanism of a plant:
To protect themselves against the effects of ultraviolet rays, cannabis plants will develop a natural defense mechanism.
The formation of trichomes by alkaloids and flavonoids acts as photoprotective molecules that will protect your plants.
A denser layer of resin, with more THC will form to protect them from ultraviolet rays.

Lydon et al., 1987 - UVB radiation effects on photosynthesis growth and cannabinoid production of two cannabis sativa chemotypes



Plants grown indoors without UV exposure may lack these benefits. That's why it's important to choose indoor grow lighting that includes UV at the right dose.
Despite our choice to use the latest SEOUL VIOSYS UV LED chip technologies, the lifetime of a UV LED chip remains lower compared to red and white LED chips. We have therefore chosen to add UV separately to our luminaires so as not to reduce the lifespan of the entire luminaire. Thus you will have the advantage of being able to replace future elements at lower cost and accept future technologies without limits.




This spectrum directly influences the morphology of the plant and its flowering.

LED PROLIGHT INFRA RED = 730nm



When the right amount of INFRA RED is present, it:

Triggers flowering faster on long-day plants.

Lengthen the plants.

Increases terpenes.

Brings warmth to plants.

Activates Emerson's effect.



When the amount of INFRA RED is too high, it:

Causes elongation which is detrimental to yield.

Risk of burning plants.

Brings too much heat to the culture.



APPLICATIONS

Use from growth (18h/d) for:

100% to 50% indica genetics that have tight internodes with little elongation.

Use in the last 3 weeks of flowering (12h/d) for:

50% to 100% sativa genetics with long internodes.



FEATURES

Power: 30w

Dimensions: 110cm x 7cm x 7cm

Weight:1.5kg

Transformer: integrated in the led bar and not dimmable

2 years warranty

Plug: Switzerland 230v AC

Product details
kit of 2 suspensions for 1 BOOST UVA UVB IR LED bar.

The kit makes it possible to fix 1 bar for those who do not have F.O.G luminaires

1 fixation pour 1 barre led BOOST UVA UVB IR de 110cm pour AIR GROW PRO II et III 600w

1 fixing for 1 BOOST UVA UVB IR led bar of 80cm and 110cm for Black Series 400 and 600w

1 fixing clip for 60cm BOOST UVA UVB IR led bars for Black Series 320w.

Bring 2 fixing clips to fix a BOOST 60 led bar on a BLACK SERIE 320w light.